• Kaynan, O., Yıldız, A., Bozkurt, Y. E., Yenigun, E. O., & Cebeci, H. (2020). Electrically conductive high–performance thermoplastic filaments for fused filament fabrication. Composite Structures. DOI: 10.1016/j.compstruct.2020.111930
  • Pehlivan, Z. S., Ürk, D., Cebeci, H., Öveçoğlu, M. L., Dönmez, A., Bulut, O., & Cebeci, F. Ç. (2019). Viscoelastic response of high volume fraction carbon nanotube-polymer nanocomposites with tailored wettability and controlled morphology. Composite Structures. DOI: 10.1016/j.compstruct.2018.10.007
  • Caglayan, C., Gurkan, I., Gungor, S., & Cebeci, H. (2018). The effect of CNT-reinforced polyurethane foam cores to flexural properties of sandwich composites. Composites Part A: Applied Science and Manufacturing. DOI: 10.1016/j.compositesa.2018.09.019
  • Kaynan, O., Atescan, Y., Ozden-Yenigun, E., & Cebeci, H. (2018). Mixed Mode delamination in carbon nanotube/nanofiber interlayered composites. Composites Part B: Engineering. DOI: 10.1016/j.compositesb.2018.07.032
  • Jahangiri, S., Aravi, İ., Işıkel Şanlı, L., Menceloğlu, Y. Z., & Özden‐Yenigün, E. (2018). Fabrication and optimization of proton conductive polybenzimidazole electrospun nanofiber membranes. Polymers for Advanced Technologies29(1), 594-602. DOI: 10.1002/pat.4169
  • Kilic, B., Turkdogan, S., Astam, A., Baran, S. S., Asgin, M., Cebeci, H., & Urk, D. (2017). Graphene-based copper oxide thin film nanostructures as high-efficiency photocathode for p-type dye-sensitized solar cells. Journal of Photonics for Energy7(4), 045502. DOI: 10.1117/1.JPE.7.045502
  • Bakhtiari, R., Ghobadi, S., Güllüoğlu, E. N., Şanlı, L. I., Gürsel, S. A., & Özden-Yenigün, E. (2017). Macroscopic assembly of flexible and strong green graphene fibres. RSC Advances7(43), 26735-26744. DOI: 10.1039/C7RA03975A
  • Ozden-Yenigun, E., Atilgan, C., & Elliott, J. A. (2017). Multi-scale modelling of carbon nanotube reinforced crosslinked interfaces. Computational Materials Science129, 279-289. DOI: 10.1016/j.commatsci.2016.12.019
  • Kucukali-Ozturk, M., Ozden-Yenigun, E., Nergis, B., & Candan, C. (2017). Nanofiber-enhanced lightweight composite textiles for acoustic applications. Journal of Industrial Textiles46(7), 1498-1510. DOI: 10.1177/1528083715622427
  • Özden-Yenigün, E., Bilge, K., Sünbüloğlu, E., Bozdağ, E., & Papila, M. (2017). High strain rate response of nanofiber interlayered structural composites. Composite Structures168, 47-55. DOI: 10.1016/j.compstruct.2017.02.007
  • Özden-Yenigün, E., Bilge, K., Sünbüloğlu, E., Bozdağ, E., & Papila, M. (2017). High strain rate response of nanofiber interlayered structural composites. Composite Structures168, 47-55. DOI: 10.1016/j.compstruct.2017.09.077
  • Jahangiri, S., & Ozden-Yenigun, E. (2017). The stability and dispersion of carbon nanotube-polymer solutions: A molecular dynamics study. Journal of Industrial Textiles, 1528083717702006. DOI: 10.1177/1528083717702006
  • Sayılan, A., Kaynan, Ö., Yusifova, A., Cebeci, H., & Yenigün, E. Ö. (2017). Design and Development of 3D Printed High Performance Textile Structures for Composites. 2017 (Volume: 24)105. DOI: 10.7216/1300759920172410502
  • Yenigün, E. Ö. (2017). Karbon Nanotüp-Polimer Nanokompozitlerde Çok Boyutlu Modelleme ile Arayüz Özelliklerinin İncelenmesi, sayfa: 503-511. Politeknik Dergisi20(3). DOI: 10.1177/1528083717702006
  • Kilic, B., Turkdogan, S., Astam, A., Ozer, O. C., Asgin, M., Cebeci, H., … & Mucur, S. P. (2016). Preparation of Carbon Nanotube/TiO 2 Mesoporous Hybrid Photoanode with Iron Pyrite (FeS 2) Thin Films Counter Electrodes for Dye-Sensitized Solar Cell. Scientific reports6, 27052. DOI: 10.1038/srep27052
  • Ürk, D., Demir, E., Bulut, O., Çakıroğlu, D., Cebeci, F. Ç., Öveçoğlu, M. L., & Cebeci, H. (2016). Understanding the polymer type and CNT orientation effect on the dynamic mechanical properties of high volume fraction CNT polymer nanocomposites. Composite Structures155, 255-262. DOI: 10.1016/j.compstruct.2016.05.087
  • Gürkan, İ., & Cebeci, H. (2016). An approach to identify complex CNT reinforcement effect on the interlaminar shear strength of prepreg composites by Taguchi method. Composite Structures141, 172-178. DOI: 10.1016/j.compstruct.2016.01.043
  • Tas, S., Kaynan, O., Ozden-Yenigun, E., & Nijmeijer, K. (2016). Polyacrylonitrile (PAN)/crown ether composite nanofibers for the selective adsorption of cations. RSC advances6(5), 3608-3616. DOI: 10.1039/C5RA23214G
  • Atescan, Y., Hadden, C. M., Wardle, B. L., Odegard, G. M., & Cebeci, H. (2015). Molecular Dynamics and Finite Element Investigation of Polymer Interphase Effects on Effective Stiffness of Wavy Aligned Carbon Nanotube Composites. In 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (p. 0701). DOI: 10.2514/6.2015-0701
  • Cebeci, H., Stein, I. Y., & Wardle, B. L. (2014). Effect of nanofiber proximity on the mechanical behavior of high volume fraction aligned carbon nanotube arrays. Applied Physics Letters104(2), 023117. DOI: 10.1063/1.4862273
  • Ozden-Yenigun, E., Simsek, E., Menceloglu, Y. Z., & Atilgan, C. (2013). Molecular basis for solvent dependent morphologies observed on electrosprayed surfaces. Physical Chemistry Chemical Physics15(41), 17862-17872. DOI: 10.1039/C3CP53079E
  • Handlin, D., Stein, I. Y., Guzman de Villoria, R., Cebeci, H., Parsons, E. M., Socrate, S., … & Wardle, B. L. (2013). Three-dimensional elastic constitutive relations of aligned carbon nanotube architectures. Journal of Applied Physics114(22), 224310. DOI: 10.1063/1.4842117
  • Mitchell, R. R., Yamamoto, N., Cebeci, H., Wardle, B. L., & Thompson, C. V. (2013). A technique for spatially-resolved contact resistance-free electrical conductivity measurements of aligned-carbon nanotube/polymer nanocomposites. Composites Science and Technology74, 205-210. DOI: 10.1016/j.compscitech.2012.11.003
  • Liu, Y., Zhao, R., Ghaffari, M., Lin, J., Liu, S., Cebeci, H., … & Heflin, J. R. (2012). Equivalent circuit modeling of ionomer and ionic polymer conductive network composite actuators containing ionic liquids. Sensors and Actuators A: Physical181, 70-76. DOI: 10.1016/j.sna.2012.05.002
  • Bilge, K., Ozden-Yenigun, E., Simsek, E., Menceloglu, Y. Z., & Papila, M. (2012). Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers. Composites Science and Technology72(14), 1639-1645. DOI: 10.1016/j.compscitech.2012.07.005
  • Özden-Yenigün, E., Menceloğlu, Y. Z., & Papila, M. (2012). MWCNTs/P (St-co-GMA) composite nanofibers of engineered interface chemistry for epoxy matrix nanocomposites. ACS applied materials & interfaces4(2), 777-784. DOI: 10.1021/am2014162
  • Liu, S., Liu, Y., Cebeci, H., de Villoria, R. G., Lin, J. H., Wardle, B. L., & Zhang, Q. M. (2010). High Electromechanical Response of Ionic Polymer Actuators with Controlled‐Morphology Aligned Carbon Nanotube/Nafion Nanocomposite Electrodes. Advanced functional materials20(19), 3266-3271. DOI: 10.1002/adfm.201000570
  • Ozden, E., Menceloglu, Y. Z., & Papila, M. (2010). Engineering chemistry of electrospun nanofibers and interfaces in nanocomposites for superior mechanical properties. ACS applied materials & interfaces2(7), 1788-1793. DOI: 10.1021/am100288r
  • Vaddiraju, S., Cebeci, H., Gleason, K. K., & Wardle, B. L. (2009). Hierarchical multifunctional composites by conformally coating aligned carbon nanotube arrays with conducting polymer. ACS applied materials & interfaces1(11), 2565-2572. DOI: 10.1021/am900487z
  • Cebeci, H., de Villoria, R. G., Hart, A. J., & Wardle, B. L. (2009). Multifunctional properties of high volume fraction aligned carbon nanotube polymer composites with controlled morphology. Composites Science and Technology69(15-16), 2649-2656. DOI: 10.1016/j.compscitech.2009.08.006
  • Sarac, A. S., Geyik, H., Parlak, E. A., & Serantoni, M. (2007). Electrochemical composite formation of thiophene and N-methylpyrrole polymers on carbon fiber microelectrodes: Morphology, characterization by surface spectroscopy, and electrochemical impedance spectroscopy. Progress in organic coatings59(1), 28-36. DOI: 10.1016/j.porgcoat.2007.01.008
  • Cebeci, F. Ç., Geyik, H., Sezer, E., & Sarac, A. S. (2007). Synthesis, electrochemical characterization and impedance studies on novel thiophene-nonylbithiazole-thiophene comonomer. Journal of Electroanalytical Chemistry610(2), 113-121. DOI: 10.1016/j.jelechem.2007.07.012